Spray Foam Diagnostics, Part 2 – Pressure Gauges and Foam Textures
When something goes wrong with your spray foam while you are on the job, it’s tempting to keep spraying and hope the issue figures itself out.
After all, that’s one of society’s great mottos, isn’t it? When the going gets tough, just keep swimming!
But many times – especially when dealing with spray foam – pushing forward without thought makes things worse!
In those moments, we need to stop, take stock, and figure out the next best step to take.
There are a lot of moving parts to a spray foam job. Any number of things could go wrong – and not one of those issues can fix itself.
So, when you notice something wrong with the foam you’re spraying, the VERY BEST thing you can do is to STOP SPRAYING!
Once you stop, you can use your glorious mind to think through what may be causing your foam to malfunction, and take the best steps possible to fixing those problems before they get worse!
Scratching your head at the concept of what your foam is doing? Not to worry!
Central Urethane is here to help you diagnose the issue and walk you through the solution – and we aim to do that as quickly as possible!
That’s why we created the Spray Foam Diagnostic and Pressure Diagnostics Flowcharts.
Our Diagnostic Flowcharts are available in PDF and phone-friendly versions, so you can view them in the most convenient way for you!
You can find the Spray Foam Diagnostic Flowchart PDF here, and the phone-friendly version here.
The Pressure Diagnostic Flowchart PDF is here, and the phone friendly version is here.
With the Central Urethane diagnostic flowcharts in hand, you have a quick reference for nipping your spray foam issues in the bud and getting back to work ASAP!
But what if you need more explanation than the flowcharts have space for?
Well, now. Inquiring minds are exactly why we created the Spray Foam Diagnostic blog post series to accompany the Diagnostic Flowcharts!
This series of blog posts walks you through the flowcharts we created step-by-step, going into a bit more detail with diagnostic solutions and problem prevention than a figure can on its own.
In our last post, we discussed the color indicators of problematic spray foam, how to fix the foam issues you may notice using abnormal spray foam colors, and how to prevent issues from forming in the future.
In this post, we examine the role pressure gauges play in diagnosing spray foam issues, and what odd spray foam textures indicate.
Using Pressure Gauges to Diagnose Spray Foam Issues
Every spray foam machine is different.
There are bells and whistles on some and radio silence on others…
But every spray foam machine is built to spray foam insulation.
That means that even if you have an entry-level machine, your spray foam machine is equipped with the necessary parts, gears, and gauges for spraying foam material onto a substrate – including pressure gauges!
Pressure gauges on your spray foam machine – one of which reads the pressure of the A-Side of your spray foam setup, while the other reads the B-Side pressure – are invaluable tools when you run into trouble while on the job. They help you quickly recognize and diagnose imbalances in your spray foam setup.
Typically, if pressure readings on the A and B sides of your spray foam setup are within ~300-500 PSI of one another, you’re sitting pretty!
However, if your A-Side and B-Side pressure readings differ by more than 500 PSI, trouble is likely a-brewing.
High A-Side Pressure Gauge Reading
If you have a pressure differentiation of greater than 500 PSI between the A and B sides of your spray foam setup, and the higher reading on the A-Side, the issue is most likely one of two things:
1) You have a supply issue on the B Side of your setup
2) There is a blockage on the A Side of your setup
B-Side Supply Issue
What we call “supply issues” occur before the spray foam enters your foam machine pumps. Two things can cause supply issues in your spray foam setup:
1) Your barrels are empty
2) Your wye screens are clogged
The first of these problems is the simplest of all issues to fix – just switch to a new B-Side barrel! If that doesn’t fix the problem, check the wye screen on the B-Side of your foam machine, and clean it if necessary.
Still having problems? You may have an A-Side plug on your hands.
A-Side Blockage
Issues occurring after the spray foam material enters your machine pumps are considered “blockages.” And if you’ve sprayed foam for even a short amount of time, you’ll know that A-side is a son-of-a-gun for stopping up the works.
Iso acts like a glue if not handled properly, crystallizing at the drop of a hat. To help prevent unnecessary blockages on this side of your spray foam setup, we recommend recirculating the material on the A-Side of your setup before you start spraying.
To recirculate the A-side, remove your spray gun from your hose. Then, use the A-Side barrel pump to circulate the iso material all the way from the barrel, through your heated (or heating) A-Side lines, and back into the barrel.
We recommend doing this process before every time you spray.
If you don’t, the effort you spent cleaning your spray gun after the last job will be unwarranted…because as soon as the first crystallized bit of cold, uncirculated A-Side hits the spray gun tip, you’ll have to clean your spray gun again.
NOTE: If you like, you can recirculate open-cell B-side as you would A-Side – but never recirculate closed-cell B-Side, because it will degrade the blowing agent in the material.
Your A-Side pressure gauge is reading high and your foam is still experiencing issues after you’ve recirculated the A-side in your lines before you started, cleaned your spray gun tip? Don’t give up!
Call or text us at 260-205-8882! We’ll help you work through the issue.
High B-Side Pressure Reading
When you find a pressure reading of greater than 500 PSI across the A and B Sides of your spray foam setup, and the B-Side reading is the higher reading, you’ve likely got either a supply issue on the A-Side of your setup or a blockage somewhere along the B-Side lines.
Supply Issue on the A-Side
An A-side supply issue, as we stated in our last blog, can be as simple as swapping out your current A-Side barrel for a fresh one.
If your barrel still has enough material, your A-Side wye screen (a.k.a. “Y Screen” or “Y Strainer”) may also be to blame for the high pressure reading on the B-Side. A wye screen functions as a filter between the material in your A-Side barrel and your foam machine – all material that enters your machine goes through a wye screen first.
Note: Because A-side can crystallize very easily in your lines, we recommend recirculating your A-side lines before you start spraying each day. Not only will that help you avoid plugs in your spray gun, it will also help clear your A-side wye screen!
Wye screens – which are on both sides of your foam machine intake lines – should be cleaned regularly to ensure optimal spray foam performance. If you find there is a supply issue on the A Side of your spray foam setup, you may need to clean the wye screen for that side!
B-Side pressure gauge still reading high after checking for supply malfunctions on the A-Side? Time to check for a plug on the B-Side of your spray foam setup.
Blockage on the B-Side
If your A-side barrel is full and the A-side wye screen is clean, but your B-side pressure gauge is still reading high, there is likely a blockage on the B-side of your spray foam setup.
Most blockages occur at the spray gun tip. So, giving your spray gun a good clean should fix that issue right up!
Worked like a charm? Fantastic!
Still need help? Give us a call or text at 260-205-8882. We’ll be happy to help you figure out what’s going on with your foam!
Spray Foam Texture Indicators
Sometimes, the texture of your foam is what tips you off to a problem in your setup. Similar to color indicators, texture indicators often point to an imbalance in your foam mixture.
Crackly or Pork Rind Textured Spray Foam
Crackly spray foam – which can look a lot like (inedible!) pork rinds – indicates too much A-Side in your foam mixture. Since A-Side is present in abundance, that means there’s likely something keeping the B-Side of your setup from functioning properly. To fix this issue, check your B-Side setup – there may be a B-Side supply issue or blockage.
For more information on addressing too much A-Side in a spray foam mixture, see our Color Indicators blog post.
Sticky Spray Foam with a Light Color
Spray foam that has a sticky texture and is light-colored has too much B-Side present in the foam mixture. Since there is too much B-Side, the problem lies on the A-Side of your spray foam setup. Check the A-Side supply – ensuring full A-Side barrel and clean A-Side wye screen – and make sure there are no blockages along the A-Side lines – specifically on the A-Side of your spray gun.
To avoid as many problems as possible due to A-side crystallization, we recommend recirculating your A-Side lines before you begin spraying each day. This will warm the material coming into your spray foam setup and minimize risk of cold, crystallized A-Side stopping up your lines.
For more information on diagnosing and addressing too much B-Side in a spray foam mixture, see our Color Indicators blog post.
Conclusion
Are you still having issues with your spray foam setup after checking out our diagnostic flowcharts and their related blog posts?
Need someone to talk to about what is going on with your spray foam? Central Urethane is here to help you! You can text or call us at 260-205-8882.
We know how frustrating spray foam problems can be, and we’ll do our best to get you back up and spraying as soon as possible!
Next time, we will wrap up our Spray Foam Diagnostic blog post series by discussing common temperature-related foam indicators, and how heat management can help keep you spraying.
